> EATON - MOELLER>Power XL Frequenzumrichter>DA1-35028NB-B20C 197499 ELECTRIC Frequenzumrichter, 500 V AC, 3-phasig, 28 A, 18.5 kW, IP20/NEMA 0, zu..
Vorheriges Produkt Nächstes Produkt
DA1-35028NB-B20C 197499 EATON ELECTRIC Frequenzumrichter, 500 V AC, 3-phasig, 28 A, 18.5 kW, IP20/NEMA 0, zu.. Vergrößern
Die Bilder sind nur orientativ. Bitte prüfen Sie das Artikelstammdatenblatt.

DA1-35028NB-B20C 197499 EATON ELECTRIC Frequenzumrichter, 500 V AC, 3-phasig, 28 A, 18.5 kW, IP20/NEMA 0, zu..

DA1-35028NB-B20C

197499

Y7-197499

EATON-MOELLER

Frequenzumrichter, 500 V AC, 3-phasig, 28 A, 18.5 kW, IP20/NEMA 0, zusätzlicher Platinenschutz, FS4

DA1-35028NB-B20C

Eaton DA1 Frequency inverter, 500 V AC, 3-phase, 28 A, 18.5 kW, IP20/NEMA 0, Additional PCB protection, FS4

Mehr Infos


Niederspannungsschaltgeräte > Frequenzumrichter el 1 kV

Power XL Frequenzumrichter

* Neues Produkt in der Originalverpackung mit allen Garantien und Zertifizierungen von EATON-MOELLER

Gesamtpreis: $2,049.02
Stückpreis: $2,049.02

Menge Preis
1+$2,049.02
2+$2,049.03
*Dieser Preis ist pro Einheit und ist der Nettowert (ohne Steuern, falls zutreffend).

Wenn unser Preis nicht der beste ist, fragen Sie uns nach einem Angebot Fordern Sie ein Angebot

Bestseller

▲

Mehr Infos

▲


Allgemeine Spezifikation

Product Name
Eaton DA1 Variable frequency drive
Catalog Number
197499
Product Length/Depth
241 mm
Product Height
419 mm
Product Width
173 mm
Product Weight
9.2 kg
Certifications
CUL
IEC/EN 61800-2
UL 508C
UL report applies to both US and Canada
IEC/EN61800-3
IEC/EN 61800-3
EAC
IEC/EN61800-5
UkrSEPRO
UL Category Control No.: NMMS, NMMS7
Certified by UL for use in Canada
RoHS, ISO 9001
Safety: EN 61800-5-1: 2003
CE
RCM
UL
UL File No.: E172143
Catalog Notes
The brake resistors are assigned based on the maximum rated power of the variable frequency drive. Additional brake resistors and designs (e.g. different duty cycles) are available upon request.
EAN
4015081940745
Model Code
DA1-35028NB-B20C

Allgemein

Cable length
200 m, unscreened, with motor choke, maximum permissible cable length
200 m, screened, with motor choke, maximum permissible cable length
100 m, screened, maximum permissible cable length
150 m, unscreened, maximum permissible cable length
Communication interface
OP-Bus (RS485)
PROFIBUS, optional
Modbus RTU
PROFINET, optional
EtherCAT, optional
DeviceNet, optional
Modbus-TCP, optional
Ethernet IP, optional
CANopen®
SmartWire-DT, optional
Connection to SmartWire-DT
Yes
In conjunction with DX-NET-SWD1 SmartWire DT module
Degree of protection
IP20
NEMA Other
Fitted with:
OLED display
IGBT inverter
Brake chopper
PC connection
Internal DC link
Breaking resistance
Additional PCB protection
Control unit
Frame size
FS4
Functions
4-quadrant operation possible
Mounting position
Vertical
Product Category
Variable frequency drives
Protection
Finger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)
Protocol
TCP/IP
PROFIBUS
EtherNet/IP
DeviceNet
CAN
PROFINET IO
MODBUS
Other bus systems
Safety function/level
STO (Safe Torque Off, SIL2, PLc Cat 2)
Suitable for
Branch circuits, (UL/CSA)

Klimatische Umweltbedingungen

Ambient operating temperature - min
-10 °C
Altitude
Max. 4000 m
Max. 1000 m
Above 1000 m with 1 % derating per 100 m
Ambient operating temperature - max
50 °C
Ambient operating temperature at 150% overload - min
-10 °C
Ambient operating temperature at 150% overload - max
50 °C
Ambient storage temperature - min
-40 °C
Ambient storage temperature - max
60 °C
Climatic proofing
< 95 average relative humidity (RH), no condensation, no corrosion

Hauptkreis

Efficiency
98.1 % (η)
Heat dissipation at current/speed
160 W at 25% current and 50% speed
167 W at 25% current and 0% speed
194 W at 50% current and 0% speed
195 W at 50% current and 50% speed
240 W at 50% current and 90% speed
306 W at 100% current and 0% speed
331 W at 100% current and 50% speed
399 W at 100% current and 90% speed
Input current ILN at 150% overload
34 A
Leakage current at ground IPE - max
28 mA
Mains switch-on frequency
Maximum of one time every 30 seconds
Mains voltage - min
500 V
Mains voltage - max
600 V
Operating mode
Optional: Vector control with feedback (CLV)
U/f control
Sensorless vector control (SLV)
Speed control with slip compensation
Output frequency - min
0 Hz
Output frequency - max
500 Hz
Output voltage (U2)
500 V AC, 3-phase
600 V AC, 3-phase
Overload current IL at 150% overload
42 A
Rated control supply voltage
10 V DC (Us, max. 10 mA)
Rated frequency - min
48 Hz
Rated frequency - max
62 Hz
Rated operational current (Ie) at 150% overload
28 A
Rated operational power at 500 V, 50 Hz, 3-phase
18.5 kW
Rated operational power at 525 V, 50 Hz, 3-phase
18.5 kW
Rated operational voltage
500 V AC, 3-phase
600 V AC, 3-phase
Resolution
0.1 Hz (Frequency resolution, setpoint value)
Short-circuit protection
LPJ fuse used together with J60060-3 fuse base, Power wiring, Assigned switching and protective elements
NH fuse used together with TB00-D fuse base, Power wiring, Assigned switching and protective elements
Short-circuit protection rating
50 A, UL (Class CC or J), Safety device (fuse or miniature circuit-breaker), Power Wiring
Starting current - max
200 %, IH, max. starting current (High Overload), for 4 seconds every 40 seconds, Power section
Supply frequency
50/60 Hz
Switching frequency
8 kHz, 4 - 24 kHz adjustable (audible), fPWM, Power section, Main circuit
System configuration type
AC supply systems with earthed center point
Voltage rating - max
600 VAC

Bemessungsbetriebsleistung

Assigned motor current IM at 500 V, 50 Hz, 150% overload
28 A
Assigned motor current IM at 525 V, 50 Hz, 150% overload
27.6 A
Assigned motor current IM at 550 - 600 V, 60 Hz, 150% overload
27 A
Assigned motor power at 575/600 V, 60 Hz, 3-phase
25 HP

Scheinleistung

Apparent power at 600 V
29.1 kVA

Trennfunktion

Braking resistance
33 Ω
Braking torque
Adjustable to 100 % (DC)
Max. 100 % of rated operational current Ie with external braking resistor - Main circuit
Max. 30 % MN, Standard - Main circuit
Switch-on threshold for the braking transistor
975 VDC

Steuerkreis

Number of inputs (analog)
2
Number of inputs (digital)
5
Number of outputs (analog)
2
Number of outputs (digital)
2
Number of relay outputs
2 (parameterizable, 1 N/O and 1 changeover contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1))
Rated control voltage (Uc)
24 V DC (external, max. 100 mA)

Bauartnachweis

10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects
Meets the product standard's requirements.
10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard's requirements.
10.2.5 Lifting
Does not apply, since the entire switchgear needs to be evaluated.
10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of assemblies
Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

Datasheet - PDF

▲
Titel: Größe: Typ:
PDF EATON STARTING CONTROLLING MOTORS EN.pdf 32 Mbytes
PDF CATALOGUE EATON EN.pdf 51 Mbytes
DA1-35028NB-B20C Y7-197499 197499 DE_169360.pdf 7 Mbytes DA1-35028NB-B20C Y7-197499 197499 DE_169360.pdf

Bewertungen (0) ▲

Es gibt keine Produktbewertungenvor.

Bewertung abgeben
Bewertung abgeben
Formular verstecken
Wertung:
Name:
E-Mail :
Betreff:
Text:
Haben Sie dieses Produkt empfehlen zu kaufen?
  Captcha
  Bewertung abgeben

Aktuelle Bewertungen unserer Kunden

Alle Bewertungen wir von den Einzelteilen erhalten wir anbieten, sind real und verifiziert. Eine kleine Geste, aber sehr wertvoll. Also danke für die Minute, die Sie in, dass Sie uns Ihre Meinung und Bewertung von Produkten ausgeben, weil es mir hilft, weiter zu verbessern und noch mehr Servicequalität zu bieten.