SENSORE MAGNETICO MEDIA SICUREZZA 11CSA 1103-CSA MCSN11-V EATON ELECTRIC Pressure switch, 3p, 15bar, relief ..

1103-CSA

MCSN11-V

EATON-MOELLER

Pressure switch, 3p, 15bar, relief valve

More details


Intrusion Components

* Brand new product in its original packaging covered by the warranties and certifications provided by EATON-MOELLER

* This article may be obsolete. Ask for a quotation and we will check if there are any units available. If not, one of our technicians will look for an alternative solution.

If our price is not the best, please ask us for a quote. Ask for a quotation

Best sellers

More info



Pressure switch, 3p, 15bar, relief valve
Alternate Catalog No.
MCSN11-V
EL-Nummer (Norway)
4356116
IEC EN 60947-5-1, IP65_x, pressure monitoring of liquid and gaseous media, e. g. compressed air, for switching of loads, make and break pressure: separately adjustable, with release valve for 6 mm Ermeto coupling
[

Delivery program

Note on use
This product complies with Low-Voltage Directive 2014/35/EC and EMC Directive 2014/30/EC and meets the requirements in EN 60947-5-1. This product does not meet the rail industry's standard requirements. Accordingly, the user must review it separately for the specific application at hand.
Product range
Pressure switches with main contacts
Degree of Protection
IP65
Number of poles
3 pole
Cut-in pressure and cut-out pressure:
separatestepless adjustment.
All the intersection points within the diagram area can be set.

Min. Switching differential 1.4 bar

Example:

Cut-out pressure 8.5 bar

Cut-in pressure 4.5 bar

With relief valve
For 6 mm Ermeto coupling
Max. operating pressure
15 bar
Notes

Features

:
  • With terminal cover as standard
  • 1 insulated protective conductor terminal
  • 1 insulated N terminal
  • 2 cable entry knockouts for M20, without cable gland
  • IP65 in conjunction with V-M20 cable gland
  • Pressure pipe flange R ½”
  • please enquire: Pressure pipe flange R ¼”
  • Neoprene membrane

R ¼” corresponds to G ¼

R ½” corresponds to G ½ as per ISO 228-1

For use as a motor load switch as per IEC/EN 60947-4-1 for:

Three-phase current

Single-phase current

Direct current DC-3

For use as control switch:

Cut-in and cut-out pressures are factory-preset as specified with type suffix → 203948

Notes

Fitted on right side with Ermeto self-sealing coupling for pipe diameter 6 mm, on request also available fitted on left side. Order code:MCSN…-VG

,

Technical data

General
Standards
IEC/EN 60947-4-1
Test pressure
32 bar
Rupturing pressure
90 bar
Operating frequency [Operations/h]
≦ 1500
Climatic proofing
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30
Ambient temperature
-25 - 70
Degree of Protection
IP65
Mounting position
As required
Mechanical shock resistance to IEC 60068-2-27 [Half-sinusoidal shock 20 ms]
> 10 g
Vibration resistance acc. to IEC/EN 60068-2-6 [Amplitude 1 mm]
36 Hz
lifespan [Operations ]
0.5 x 106
Terminal capacitiesSolid
1 x (0.75 - 2.5)
2 x (0.75 - 1.5) mm2
Terminal capacitiesFlexible with ferrules to DIN 46228
1 x (0.5 - 1.5)
2 x (0.5 - 1.5) mm2
Terminations
Flat terminal with clamping washer
Terminal screw
M4
Tightening torque of terminal screw
1.2 Nm
Contacts/switching capacity
Rated impulse withstand voltage [Uimp]
4000 V AC
Rated insulation voltage [Ui]
400 V
Overvoltage category/pollution degree
III/3
Max. short-circuit protective deviceFuseless
PKZM0-20 Type
Max. short-circuit protective deviceFuse [gG/gL]
20 A
Type of coordination
1
Rated short-circuit current [Iq(= Current r)]
1 kA
AC-3Rated operational current230 V
15 A
AC-3Rated operational current400 V
11.5 A
AC-3Rated power P230 V
4 kW
AC-3Rated power P400 V
5.5 kW
DC - 3Rated operational current24 V
16 A
DC - 3Rated operational current110 V
12.5 A
DC - 3Rated operational current250 V
2 A
Rated frequency [f]
50 Hz
,

Design verification as per IEC/EN 61439

Operating ambient temperature min.
-25 °C
Operating ambient temperature max.
+70 °C
,

Technical data ETIM 7.0

Low-voltage industrial components (EG000017) / Pressure switch (EC000243)
Electric engineering, automation, process control engineering / Low-voltage switch technology / Monitoring equipment (low-voltage switch technology) / Pressure monitoring equipment ([email protected] [AKF108014])
Suitable as guard
Yes
Suitable as 2-point controller
Yes
Suitable as limiter
No
Max. operation pressure
15000 hPa
Engaging pressure
0 - 9.4 bar
Initial setting
0 - 0 hPa
Switch off pressure
0 - 11 bar
End setting
0 - 0 hPa
Pressure-switching differential
0 bar
Max. test pressure
32 bar
Bursting pressure
90 bar
Medium temperature
25 - 80 °C
Connection
Inner thread gas cylindrical (BSPP)
Thread size
1/2 inch
Rated voltage Ue at AC 50 Hz
0 - 400 V
Rated voltage Ue at AC 60 Hz
0 - 400 V
Rated voltage Ue at DC
0 - 250 V
Initial value measuring range pressure
0 Pa
End value measuring range pressure
0 Pa
Rated operation power at AC-3, 400 V
5.5 kW
Switching capacity at AC-3, 240 V
15 kA
Rated operation current Ie at AC-1, 400 V
0 A
Rated operation current Ie at AC-3, 400 V
11.5 A
Number of auxiliary contacts as normally open contact
0
Number of auxiliary contacts as normally closed contact
0
Number of auxiliary contacts as change-over contact
0
Type of electric connection
Screw connection
Number of normally closed contacts as main contact
3
Number of main contacts as normally open contact
0
Adjustable current range
0 - 0 A
With hand operation
No
With manual on/off switch
No
Electronic version
No
With display
No
Explosion-proof
No
Degree of protection (IP)
IP65
Degree of protection (NEMA)
Other
Height
111 mm
Width
93 mm
Diameter
0 mm
Depth
96 mm
,

Approvals

Product Standards
CSA-CC22.2 No. 14
CSA File No.
12528
CSA Class No.
3211-06
North America Certification
CSA certified
,

Dimensions

With relief valve
]

Datasheet - PDF

Reviews (0)

No customer reviews for the moment.

Add Review
hide form
Rating:
Name:
Email:
Subject:
Text:
  Captcha
  Add review

All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.