15345062 LAPP ÖLFLEX TRAIN 345 C 600V 7x1

proceeds

• Copper display meets EMC requirements and protects against electromagnetic interference
• Good chemical resistance please see Appendix T1
• Resistant to mechanical aggression in adverse environmental situations
• Extended temperature range
• Reduced flame spreading increases the protection against damage to persons and property in the event of a fire

Scope of use

• For use in vehicles on rails, for fixed laying and for applications where limited movements are expected
• Suitable for connecting lamps, heating equipment, switching devices, terminal boxes and power supply
• Also applicable in environments with oils and areas with high ambient temperature

Product features

• Fire performance according to EN/IEC:
  - Halogen-free according to EN 60754-1
  - No corrosive gases according to EN 60754-2
  - Fluoride-free according to EN 60684-2
  - No toxic gases according to EN 50305
  - Low smoke density according to EN 61034-2
  - Non-flame propagator according to EN 60332-1-2
  - Non-propagator of the fire according to EN 60332-3-24 / EN 60332-3-25 / EN 50305
• Fire behavior according to NF:
  - Gas toxicity according to NF X 70-100
  - Low smoke density according to NF X 10-702
  - Non-flame propagator according to NF C 32-070,
  Cat. C1 and C2
• Chemical properties:
  - oil resistant according to EN 50264-3-2
  - fuel resistant according to EN 50264-3-2
  - acid resistant according to EN 50264-3-2
  - alkali resistant according to EN 50264-3-2
  - ozone resistant according to EN 50264-3-2/
  IN 50305)
• Maximum permissible current intensity according to EN 50355, Annex A

Reference Standards / Approvals

• EN 50264-3-2 type MM S
• EN 45545-2 HL1, HL2, HL3
• NF F 16-101 - Rating: C/F0
  (flame/smoke spread)

Product composition

• Conductor: Fine wires of tinned copper wire
• Insulation: EI 109 electron beam cross-linked polymer compound
• Insulation color: black with white numbers
• Wrap: halogen-free polyamide sheet
• Display: Tinned copper braid
• Outer shell: EM 104 electron beam cross-linked polymer compound
• Outer shell color: black

ETS Classification 5

• ETIM 5.0 Class-ID: EC000104
• ETIM 5.0 Class Description: Control Cable

ETTIM Rating 6

• ETIM 6.0 Class-ID: EC000104
• ETIM 6.0 Class-Description: Control Line

Driver Identification Code

• Black with white numbers

Driver training

• Fine wire/drawing according to IEC 60228, class 5 conductor

Minimum radius of curvature

• Fixed installation:
  ≤ 12 mm: 3 x DE
  > 12 mm: 4 x DE
• Occasional flexible use:
  ≤ 12 mm: 4 x DE
  > 12 mm ≤ 20 mm: 5 x DE
  > 20 mm: 6 x DE
  (DE = outer diameter)

Nominal voltage

• U₀/U 0.6/1 kV
• U_mAC 1.2 kV
  V₀DC 0.9 kV

Test voltage

• 3.5 kV AC; 8.4 kV DC

Protective conductor

• G = with GN-YE protection conductor
  X = no protective conductor

Temperature range

• Fixed installation: -45°C to +120°C (20,000 h) -50°C according to GOST 20.57.406-81
• Occasional bending: -35°C to +90°C
  Short circuit: +200°C (5s)