2170997 LAPP UNITRONIC BUS PB FD FRNC FC

proceeds

• Fast Connect (FC) cable design
• Suitable for those occasions when the combination of a halogen-free outer shell with superior slow-burning properties and similar to polyurethane is required
• These cables can be used for PROFIBUS-DP as well as profibus-fms and fip

Scope of use

• For extra-flexible use, in energy chains,
  in moving machinery
  continuous and in linear robots.
• This cable provides special advantages
  for use in sensitive areas, where the
  Flame spread should be avoided
  and the presence of toxic fumes could
  cause personal and material damage.

Product features

• Halogen-free
• Oil resistant
• Vertical Tray Flame Test Method according to UL 1685
• based on the indicated bit rates according to the pno specifications the following maximum cable lengths are valid for a bus segment
  (type A cable, PROFIBUS-DP):
  93.75 kbit/s = 1200 m
  187.5 kbit/s = 1000 m
  500 kbit/s = 400 m
  1.5 Mbit/s = 200 m
  12.0 Mbit/s = 100 m

Reference Standards / Approvals

• UL/CSA (CM) certified cable

Product composition

• Fine braided threads of bare or tinned copper
• Conductor insulation: O2YS foam
• Longitudinal global reinforcement of corrugated steel and aluminum tape
• Inner cover: mixture of thermoplastic and halogen-free material
• Outer shell: PUR, violet (RAL 4001)

ETS Classification 5

• ETIM 5.0 Class-ID: EC000830
• ETIM Class 5.0 Description: Data Cable

ETTIM Rating 6

• ETIM 6.0 Class ID: EC000830
• ETIM 6.0 Class-Description: Data Cable

Mutual capacity

• Nom. 28 nF/km

Working crest tension

• (not suitable for power applications)
  250 V

Minimum radius of curvature

• Fixed installation: 10 x outer diameter
• Mobile: 15 times the outside diameter

Test voltage

• Conductor/conductor: 1500 V rms

Characteristic impedance

• (3 - 20 MHz): 150 ± 15 Ohm

Temperature range

• Bending: -30°C to +70°C
• Fixed installation: -40°C to +80°C