Product successfully added to your shopping cart
FKC 2,5/ 3-ST-5,08 PA1,3
1068261
PHOENIX_CONTACT
1
PCB connector, nominal cross-section: 2.5 mm², colour: green, nominal current: 12 A, nominal voltage (III/2): 320 V, surface contacts: Tin, contact type: Female, number of rows: 1, number of poles: 3, article family: FKC 2.5/.. -ST, pitch: 5.08mm, connection type: Push-in spring connection, driver/printed circuit board connection direction: 0°, clamping hook: - Clamping hook, plug-in system: COMBICON MSTB 2.5, locking: without, attachment type: without, packing type: boxed packaging
PCB connector, nominal cross-section: 2.5 mm2, color: green, rated current: 12 A, sizing voltage (III/2): 320 V, contact surface: Tin, contact connection type: Female, number of rows: 1, number of poles: 3, product series: FKC 2.5/.. -ST, pitch: 5.08 mm, connection type: Push-in spring connection, conductor/board connection direction: 0°, locking hook: - Locking hook, pin system: COMBICON MSTB 2.5, locking: absent, fastening type: absent, packaging type: packed in carton
PCB Connectors (PCC)
* Brand new product in its original packaging covered by the warranties and certifications provided by PHOENIX_CONTACT
Thank you for your interest in our products; we hope the delivery time indicated is to your convenience.
While the order is being processed you can select the type of shipment that best suits your needs: 24-hour air express, standard 48-72 hour land, etc.
Product Line | COMBICON Connectors M |
Product Type | Printed circuit board connector |
Product Family | FKC 2.5/.. -ST |
No. of poles | 3 |
Step | 5.08 mm |
Number of rows | 1 |
Rated Current IN | 12 A |
Rated voltage UN | 320 V |
Degree of pollution | 3 |
Mass Resistivity | 1 mΩ |
Sizing voltage (III/3) | 320 V |
Sizing impulse voltage (III/3) | 4 kV |
Sizing voltage (III/2) | 320 V |
Sizing Impulse Voltage (III/2) | 4 kV |
Sizing voltage (II/2) | 630 V |
Sizing Impulse Voltage (II/2) | 4 kV |
Connection technology | |
Connector system | COMBICON MSTB 2.5 |
Nominal cross-section | 2.5 mm² |
Contact Connection Type | female |
Blockage | |
Clamping Type | absent |
Fixing flange | absent |
Conductor connection | |
Link | Push-in spring connection |
Direction of connection of the conductor to the direction of insertion | 0 ° |
Conductor/board connection direction | 0 ° |
Rigid conductor cross-section | 0.2 mm² ... 2.5 mm² |
Flexible conductor cross-section | 0.2 mm² ... 2.5 mm² |
Conductor cross-section AWG | 24 ... 12 |
Flexible conductor cross-section with cable lug without plastic collar | 0.25 mm² ... 2.5 mm² |
Flexible conductor cross-section with mounted lug and plastic collar | 0.25 mm² ... 2.5 mm² |
2 conductors of identical cross-section flexible with TWIN ferrule with plastic collar | 0.5 mm² ... 1.5 mm² |
Buffer Gauge a x b / diameter | 2.8 mm x 2.0 mm / 2.4 mm |
Length of the section to be stripped | 10 mm |
Indications for ferrules without isolation collar | |
Recommended crimping tool | 1212034 CRIMPFOX 6 |
cable lug without insulating collar, in accordance with DIN 46228-1 | Cross-section: 0.5 mm²; Length: 8 mm 10 mm |
Cross-section: 0.75 mm²; Length: 8 mm 10 mm | |
Cross-section: 1 mm²; Length: 8 mm 10 mm | |
Cross-section: 1.5 mm²; Length: 8 mm 10 mm | |
Cross-section: 2.5 mm²; Length: 10 mm | |
Indications for ferrules with isolation collar | |
Recommended crimping tool | 1212034 CRIMPFOX 6 |
cable lug with insulating collar, in accordance with DIN 46228-4 | Cross-section: 0.5 mm²; Length: 8 mm 10 mm |
Cross-section: 0.75 mm²; Length: 8 mm 10 mm | |
Cross-section: 1 mm²; Length: 8 mm 10 mm | |
Cross-section: 1.5 mm²; Length: 8 mm 10 mm | |
Cross-section: 2.5 mm²; Length: 10 mm |
Material information - contacts | |
note | Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201 |
Contact Material | Cu Alloy |
Surface Finish | Hot-dip galvanizing |
Metal Surface, Connection Point (Surface Layer) | Tin (4 - 8 μm Sn) |
Metal surface contact zone (surface layer) | Tin (4 - 8 μm Sn) |
Material information - case | |
Color (Case) | Green (6021) |
Insulation material | PA |
Insulation Material Group | The |
CTI according to IEC 60112 | 600 |
Combustibility class according to UL 94 | V0 |
Flammability index of GWFI filament according to EN 60695-2-12 | 850 |
GWIT filament ignition temperature according to EN 60695-2-13 | 775 |
Brinell hardness test temperature according to EN 60695-10-2 | 125 °C |
Material data - drive element | |
Colour (Drive Element) | Orange (2003) |
Insulation material | PBT |
Insulation Material Group | The |
CTI according to IEC 60112 | 600 |
Combustibility class according to UL 94 | V0 |
Dimensioned Drawing | ![]() |
Step | 5.08 mm |
Width [w] | 15.86 mm |
Height [h] | 15 mm |
Length [l] | 25.73 mm |
Note for Operation | According to DIN EN 61984, COMBICON connectors are switchable powerless (COC) connectors. For intended use, they must not be plugged in or disconnected when they are still energized or under load. |
Conductor connection | |
Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
Result | Test passed |
Conductor Integrity and Stability Test | |
Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
Result | Test passed |
Repeated connection and disconnection | |
Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
Result | Test passed |
Tensile test | |
Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
Conductor cross-section/conductor type/tensile force nominal value/actual value | 0.2 mm² / rigid / > 10 N |
0.2 mm² / flexible / > 10 N | |
2.5 mm² / rigid / > 50 N | |
2.5 mm² / flexible / > 50 N | |
Insertion/tensile force | |
Result | Test passed |
Number of cycles | 25 |
Insertion force per pole approx. | 8 N |
Tensile force per pole approx. | 6 N |
Resistance of lettering | |
Test Specification | DIN EN 60068-2-70:1996-07 |
Result | Test passed |
Polarization and encoding | |
Test Specification | DIN EN 60512-13-5:2006-11 |
Result | Test passed |
Visual inspection | |
Test Specification | DIN EN 60512-1-1:2003-01 |
Result | Test passed |
Dimensional control | |
Test Specification | DIN EN 60512-1-2:2003-01 |
Result | Test passed |
Vibration test | |
Test Specification | DIN EN 60068-2-6 (VDE 0468-2-6):2008-10 |
Frequency | 10 - 150 - 10 Hz |
Sweep Speed | 1 octave/min |
Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
Sweep Speed | 5g (60.1 Hz ... 150 Hz) |
Test duration per axle | 2.5 h |
Electrical life control | |
Test Specification | DIN EN 60512-9-1 (VDE 0687-512-9-1):2010-12 |
Vertical impulse tension above sea level | 4.8 kV |
Mass Resistivity R1 | 1 mΩ |
Mass Resistivity R2 | 1.1 mΩ |
Manoeuvring cycles | 25 |
Insulation Resistance Between Contiguous Poles | > 5 MΩ |
Climate control | |
Test Specification | DIN EN ISO 6988:1997-03 |
Stress due to corrosion | 0.2 dm3KNOW2on 300 dm3/40 °C/1 cycle |
Stress due to the effect of heat | 100 °C/168 h |
Fixed AC voltage | 2.21 kV |
Environmental conditions | |
Ambient temperature (operating) | -40 °C ... 100 °C (depending on derating curve) |
Ambient temperature (storage/transport) | -40 °C ... 70 °C |
Relative humidity (transport and storage) | 30 % ... 70 % |
Ambient temperature (mounting) | -5 °C ... 100 °C |
Thermal Test | Control Group C | |
Test Specification | DIN EN 60512-5-1:2003-01 |
Number of poles tested | 12 |
Insulation Resistance | |
Test Specification | DIN EN 60512-3-1:2003-01 |
Insulation Resistance Between Contiguous Poles | > 5 MΩ |
Creepage and Creepage Distances | | |
Test Specification | DIN EN 60664-1 (VDE 0110-1):2008-01 |
Insulation Material Group | The |
Resistance to surface currents (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
Rated insulation voltage (III/3) | 320 V |
Rated impulse voltage (III/3) | 4 kV |
Minimum clearance value - inhomogeneous range (III/3) | 3 mm |
Minimum creepage value (III/3) | 4 mm |
Rated Isolation Voltage (III/2) | 320 V |
Rated impulse voltage (III/2) | 4 kV |
Minimum creepage value - inhomogeneous range (III/2) | 3 mm |
Minimum creepage value (III/2) | 3 mm |
Rated Isolation Voltage (II/2) | 630 V |
Rated Impulse Voltage (II/2) | 4 kV |
Minimum creepage value - inhomogeneous range (II/2) | 3 mm |
Minimum creepage value (II/2) | 3.2 mm |
Packaging | Packed in carton |
Title: | Size: | Type: |
---|---|---|
PDF CATALOG PHOENIX PCB CONNECTORS EN.pdf | 15 Mbytes |
![]() |
No customer reviews for the moment.
Rating: |
![]() ![]() ![]() ![]() ![]() |
Name: | |
Email: | |
Subject: | |
Text: | |
Do you recommend this product to buy? | |
|
|
Add review |
All ratings we receive from the items we offer are real and verified. A small gesture, but a lot of value. That's why we thank you for that minute you invest in leaving us your opinion and qualification about the products, because it helps us to continue improving and to offer you a service of even higher quality.